Maschinenfabrik Berthold Hermle AGMaschinenfabrik Berthold Hermle AG

Bestseller!
Hermle in the specialist press.

Contact 

Maschinenfabrik Berthold Hermle AG

Udo Hipp / Marketing Manager

Phone: 07426 95-6238

E-mail: udo.hipp@hermle.de

Hermle-Leibinger Systemtechnik GmbH RS 2 Combi

09.04.2018

Hermle-Leibinger Systemtechnik GmbH 20 years of ultimate automation

When Hermle-Leibinger Systemtechnik GmbH (HLS) - today
a 100% subsidiary of Hermle - was founded in 1998, machining centre automation technology was still in the experimental stage. HLS initially focussed on handling and feed systems and basic machining centre automation. However, the importance of robot technology and combining several machining centres to create a manufacturing system soon became clear. And it was not long before additional technologies such as cleaning, measuring and monitoring were integrated into the turn-keys. But, in particular, it was robot technology based on an ingenious platform strategy that allowed HLS to constantly move into new areas of activity and industries.
Well over 300 systems have since been installed at Hermle machines, including linear systems with up to five, robot-controlled machining centres. Production machines from other manufacturers have also been incorporated into these complex systems.

RS 2 Combi robot system with kanban, adapted to a C 32 U dynamic 5-axis machining centre

Robot system RS 2 Combi
with integrated kanban storage

A refined RS 2 Combi robot system, which has been adapted to a
C 32 U dynamic 5-axis machining centre, was recently assembled and installed specifically for the Technology and Training Centre and the Hermle Open House, which is held there.

This robot system is a platform-based system with a built-on cabin and a 6-axis industrial robot designed for transporting a maximum weight of 240 kg. The customisable shelf storage systems house both gripper storage stations (for pallets and workpiece handling) and additional tool storage (for large/heavy milling and drilling tools) or various storage stations for pallets and/or workpieces on dies.
A kanban magazine for cubic and/or cylindrical workpiece blanks was integrated along with a conveyor belt for semi-finished and finished parts and a chute for reject parts. A setup station with an additional control panel has also been adapted. The robot system can be detached from the machining centre with a door system,
so the operator has direct access to the working area of the machining centre (setting up or taking measurements), while the robot can serve other machining centres in parallel.

RS 2 Combi robot system with kanban, adapted to a C 32 U dynamic 5-axis machining centre

RS 2 Combi robot system with kanban system

RS 2 Combi robot system with kanban, adapted to a C 32 U dynamic 5-axis machining centre

Storage utilisation

  • 4 varying additional grippers
  • 4 (up to 6) jig pallets WxDxH 400 x 400 x 320 mm
  • 12 pallets with workpieces WxDxH 400 x 400 x 360 mm
  • 6 pallets with workpieces WxDxH 400 x 400 x 500 mm
  • 3 pallets with workpieces WxDxH 400 x 400 x 420 mm
  • Kanban system with 35 workpiece chutes for blanks (cubic or cylindrical) from 20x20x20 mm to 100x100x100 mm
  • 5 manual tools HSK 63 for oversized tools
    Ø 200 x 450 mm in length and 15 kg
  • 4 die-plate pallets WxDxH 530 x 630 x 260 mm
    for 12 workpieces up to 100x100x100 mm
  • 4 die-plate pallets WxDxH 530 x 320 x 410 mm
    each with 3 ITS-148 pallets
up
arrow up

Cookies

This website uses cookies to optimise your browser function.

The facility to view all videos, save your choices under "Customize", and set localisation options, is only available with cookies.

Find out how we use cookies, and how you can change your settings.

Accept cookiesReject cookies